SINGER W162 User Manual

Page 17

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

1 6

Drop feed, lock stitch width at 4, take 3 or 4 stitches, leave needle in fabric left of stitchesi

Pivot fabric on needle to make next daisy petal.

Continue until flower design is complete,?

Lock threads by setting stitch width at 0 and taking 3 or 4 stitches in center of design, f

r

Fig. 24

AUTOMATIC EMBROIDERY

Your machine will produce embroidery patterns automatically by inserting anyone of its

cams (Fig. 24; in the chamber on top of the machine.

Be sure the zigzag needle plate and zigzag presser foot are on the machine, control lever "A"

position and the zigzag stitch width stops "D" are in the off positions.

With zigzag stitch width lever "B" fFig. 25) in its extreme right hand position, place cam

on spindle, apply slight pressure while turning cam until it slips down into place.

Advertising