SINGER W162 User Manual
Page 29
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
2 8
Trouble
Skipping
stitches
Irregular
stitches
Uneven
stitches
Probable Cause
Correction
Bent needle
Needle
placed
incorrectly
in clamp
Discard and replace.
See instruction page No. 6.
Too fine a needle for thread
being used
Upper thread tension too
loose
Improper threading
Bobbin not wound even j
Pulling or holding material j
Not enough tension on
j
upper thread
!
Poor quality thread
See needle and thread chart, page No. 5.
Tighten upper tension.
See threading instruction, page No. 9.
Rewind bobbin.
Needle too fine for thread
being used
Avoid pulling or holding material, just guide it.
Increase tension.
Try different thread.
See needle and thread chart, page No. 5.