SINGER W162 User Manual
Page 22
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
21
Remove the toothpick and wind thread under
^""^IpiyThe^aLie^ method irsew on buttons with
i bur °hoi button i to be sewn, iollow the
same procedure above tor the two hole buttm.
Now lift presser foot slightly and move i^bnc о
permit
stitching
the
remaining
two
^oles
Hooks,
Laps, etc., are sewn to the fabric with the same
procedure as for sewing two hole buttons.
HOW TO USE ACCESSORIES
NARROW HEMMER. With the needle a^ts
highest position, replace regular presser oo
nLLow hemmer (Fig. 31).
For
a plain narrow hem,
make a 1/8 inch double fold for ^^out two inches
along edge of fabric. Hold each end of the two inch
fold, slip underneath hemmer. Bring fold
the scroll of hemmer, draw forward to end and fas
ten with point of needle. Lower presser bar lifter.
Gently pull ends of thread as you start stitching.
GuiL material slightly to right, and it will auto
matically take a double turn through scroll.
LACE TRIMMED HEM. To sew a narrow hem
and attach lace in one stitching, insert lace in the
Lt
nerf
to
needle
(Fig.
32)
Sew
hem as
above,
guiding lace under needle and hem into sorol .
Fig. 31
Fig. 32