Raising the bobbin thread, Raisingtho^bobbin thread – SINGER 6211 User Manual

Page 15

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

RAISING THE BOBBIN

THREAD

Once the needle has been threaded

and the bobbin placed in the bobbin

case, the bobbin thread must be brought
up through the hole in the needle plate.

1. Hold needle thread loosely with left

hand.

• Turn hand wheel slowly toward

you, lowering needle into hole in
plate.

2. Continue to do this until needle

rises above needle plate.

• Pull gently on needle thread and

bring up bobbin thread in a loop.

3. Open loop with fingers to find end

of bobbin thread.

4. Draw needle thread through left

side opening in presser foot

• Pull both threads to back of ma­

chine.

• When sewing with heavier weight

thread,

do not

thread the lower

thread guide no. 10.

13

Advertising