Zig-zag stitching, Stitch width selector, Needle position selector – SINGER 6211 User Manual
Page 22: Section 4. zig-zag stitching
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
4. ZIG-ZAG STITCHING
STITCH WIDTH SELECTOR
Before moving selector, make sure
needle is fully raised.
• To produce a zig-zag stitch, the
stitch width selector is moved from
its straight ( i ) position to any of its
other four positions. The further you
move the selector lever toward the
right, the wider your stitch will be.
NEEDLE POSITION
SELECTOR
Before moving selector, make sure
needle is fully raised.
• Most of your zig-zag stitching, will be
done in the center (
) needle
position.
• Left ( ^ ) and right ( ^ ) settings
are u s e d f o r s p e c i a l s t i t c h
placement.
Advertising