Attaching the button, Attaching a button – SINGER 6211 User Manual

Page 25

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

ATTACHING THE BUTTON

Fiat buttons can be sewn on quickly and easily using the plain zigzag stitch. A
special button sewing foot (H), may be purchased at your sewing center.

RECOMMENDED SETTINGS
Stitch Selection: Zig-Zag Stitch

Needle Position: ILti

Stitch Width: To suit Button

Foot: Button Sewing (H)

Needle Plate: General Purpose (A)
Attach Feed Cover (F)

Before you can attach a button, the

bobbin thread must be brought up
through the hole in the feed cover.

1. Set stitch width at ] , and needle

position selector at , Position
button under foot and lower the

needle into the center of the left

hole. Lower the foot. Turn hand

wheel toward you until needle
rises out of button and is above the

foot.

2. Move stitch width selector until

needle is over the other hole in the

button. Then, when you begin to

stitch, the needle should enter into

the right hole of the button. Take six
or more zig-zag stitches to attach
button and finish with the needle on
the left side.

3. To fasten stitching, adjust width to

i , and take three or four stitches.

Remove work, draw threads to
underside, fasten, and trim.

23

Advertising