Xo reverse sew, Co uegiilalc the jceagth of thc^stitchm, Xo reverse sew i – SINGER W1305 User Manual

Page 10

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

r'|‘.

CO Uegiilalc the jCeagth of thc^Stitchm^:^

rf

'To regulate length of

stitch, loosen thumb-screw

"A” and move it to the

bottom of the curved slot.

Now move stitch regulat­

or lever “B” until its top­

side is in line with the

number indicating the se­

lected length of stitch.

Move

thumb-screw

“A”

until the regulator plate

touches

the

lever

”B”,

then tighten thumb-screw

"A”.

Xo Reverse Sew

i

Loosen the thumb-screw "A” and move lever "B" above center line

towards position "R”.

can now adjust for desired reverse stitch. Tighten thumb-screw

A , so that it will lock the stitch. The machine will now sew in reverse.

NEVER SEW OR USE THE MACHINE with the Lever in

the NEUTRAL position.

To ADJUST THE BOBBIN TENSION.

All

sewing

machines

are

correctly

adjusted

before

leaving

the

factory,

and

it

is

therefore seldom necessary to alter the bobbin tension.

'

Should it become necessaiy to do so, however, due to using certain hinds of materials,

the

adjusting

screw

in

the

tension

spring

on

the

outside

of

the

bobbin

case

can

be

tightened so as to increase the tension, or loosened slightly in order to lessen the tension.

10

Advertising