SINGER 401 User Manual

Page 26

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

,, :i

Raised or Corded Buttonholes. Both No. 8 pearl

cotton and buttonhole twist make suitable filler

cords for raised buttonholes.

Place the spool of filler cord on the second spool

pin. Carry the cord through the first thread guide,

straight down between the centre and back tension
discs, into the large thread guide and then through
the eyelet on the Special Purpose Foot. Draw the

cord under and in back of the foot and proceed as
for regular buttonholes.

BUTTONHOLES

F.

©

To secure stitching move Red Lever to No. 1 set­

ting and take three stitdies. Remove work, draw
threads to the underside, fasten and trim.

With sharp embroidery scissors cut opening for

button.

47

APPLIQUE

Applique adds beauty and interest to wearing

apparel, linens and fabric furnishings.

Either contrasting or seif fabric may be used

effectively. The most versatile stitch in applique-

ing is a closely set zigzag stitch (Primary Pattern

BL). The width of this stitch may be varied to ac­

commodate weaves and textures of fabrics. Com­

bination Patterns and Variations present many in­

teresting ways to applique with decorative stitch­

ing.

Preparation. There are two methods by which

applique work may be done. The appropriate me­

thod is determined by the fabric being used, and

a test sample is advisable.

Position the design properly and baste it to the

fabric. Attach the Special Purpose Foot to the pres­

ser bar.

48

Method No. 1. Set Selector and Red Lever for the

desired stitch pattern. Following the shape of the

design, outline it entirely with applique stitching.

Any excess fabric on the outer edges is trimmed

away after the stitching has been completed.

Advertising