SINGER 401 User Manual

Page 7

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Place material under presser foot and lower the

foot.

BELT SHIFTER

To throw off the belt, work the treadle and move

belt shifter to position shown.

To replace belt, release belt shifter and work

treadle slowly with band wheel turning over to­

ward you. One or two revolutions of band wheel
will bring belt back into place.

Operate machine (without thread) until you be­

come accustomed to guiding the material.

Note: Tension on belt should be only heavy en­

ough to keep belt from slipping.

UPPER THREADING-SINGLE NEEDLE

Raise take-up lever to highest point. Place thread

on spool pin and lead through threading points

shown. Thread needle from front to back. Draw suf­

ficient thread through eye of needle with which to

start sewing.

Advertising