SINGER 401 User Manual
Page 3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Addendum
WIND THE BOEBl^
Loosen stop motion screw with right hand. Raise bobbin winder and position
bobbin on spindle. Press winder against hand wheel.
WIND THE BOBBIN (Cont'd.)
‘t-:
Hold thread end to start winding. Activ
machine.
Place thread on spool pin and lead between
bobbin winder tension discs. Thread through
hole in left side of bobbin as shown.
\lv
Full bobbin will automatically release.
Tighten stop motion screw.
Advertising