SINGER 719 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
1.
Hold
bobbin
so
that
the
thread
unwinds
in
direction
shown,
and
put
bobbin
in
bobbin case.
Pull
thread
Into
notch
in
bobbin
case,
draw
it
under
the
tension
spring
and
into the slot.
3.
Draw approximately three inches of
thread diagonally across the bobbin.
4. Close slide plate, allowing the thread
to enter the slot in the slide plate.
11
Advertising