Changing nesdie – SINGER W1577 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Changing Nesdie ,
■ ■
Set needle in the highest position
by turning handwheel towards you.
Loosen needle clamp screw and
take out needle.
With flat face away from you, insert
a new needle into groove of needle
bar.
Push needle until it reaches stopper
@ and tighten needle clamp screw
firmly.
Always use a straight needle with a
sharp point.
Using defective or worn needles not
only causes stitch skipping, break
age of needles or snapping of
thread; it also can damage hook
and needle plate.
Advertising