Buttonhole density adjustment – SINGER W1577 User Manual

Page 26

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Buttonhole Density

Adjustment

Adjustment is located to right of
stitch length dial.

With some materials it is possible
that the sides or density of a button­
hole will vary, it is possible to adjust
or balance these sides by turning

the special buttonhole adjustment to

“+” or to attain a correct
balance.

It is advised to always turn this ad­

justment to center as this may vary
some of the other stitches slightly.

If the stitches on the right side of the
buttonhole are too open, turn the

dial counter-clockwise.

Turning dial counter-clockwise

closes right side and opens left

side.

If the stitches on the right side of the
buttonhole are too close together,

turn the dial clockwise (+).

Turning dial clockwise opens

right side and closes left side.

Advertising