Threading upper thread – SINGER W1577 User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Threading
Upper
Thread
Raise presser foot.
Set take-up lever to the highest
position by turning handwheel
towards you.
Pull out spoolpin and put a felt on
spool pin.
Put a spool on spool pin.
Thread, following numbers © - ©.
Pass thread through guide ®.
Lead thred thru either side of
tension disc @.
Hook it to lower guide ® from right
to left upwards.
Thread take-up lever @.
Pass thread to guide ® from right
to left, and needle guide ® (use left
one) then to needle eye ®.
Allow about 15cm (6 ") of thread
extra.
Advertising