Making buttonholes, Determine length, Determine width – SINGER W1577 User Manual
Page 24
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
7. MAKING BUTTONHOLES
Set machine as shown. "
Determine Length
Measure diameter and thickness of
button and add 0.3cm (1/8") for bar
tacks.
Mark buttonhole size on material.
Determine Width
Determine width according to di
ameter of button, its thickness, and
kind of material.
Attach buttonhole foot.
Completely push back sliding part
@ of buttonhole foot.
Place material under foot so that
marking of buttonhole passes
through center of foot. Arrow (B)
of foot indicates beginning line of
marking.
Extra thread is placed under foot
and then to left or back.
Advertising