6. adjustments for size of bight, 4 cr d – SINGER WSL7234 User Manual

Page 16

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

3-6. Adjustments for Size of Bight.

• Adjust the size of the bight from 4.2mm (0.16")

to 6.0mm (0.23") according to the kind of
material.

• The standard bight size is 4.5mm (0.17")
• Open the side cover to adjust the bight size.

(1) If the cutting width is narrower than the bight

size, turn the bite width adjusting dial to the direc­
tion of arrow. (To bigger number)

(2) If the cutting width is wider than the bight size,

turn the bite width adjusting dial to the direction of
the arrow, a smaller number)

The right figure shows that the size of the bite
between the left needle and the edge of the
material 4.5mm.

4----------- 1

cr

D

Advertising
This manual is related to the following products: