4. replacing needles – SINGER WSL7234 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Cover the spool \with the “NET” as chemical
fibers (fibres) and the like are easily frayed.
When using a real type thread spool, insert the
spool adapter (supplied with the machine) (as
shown).
2-4. Replacing Needles
Replace needles in the following way:
Note: be sure to take out the power supply plug
before replacing needles.
(1) Bring needles to their highest position by
turning handwheel towards you.
(2) Loosen the needle clamp screw and remove
the two needles together.
(3) With the flat side away from you, insert the
new two needles together into the groove of
needle bar as far as it will go.
Use "HA X ISP (705/130)"
m(80)
or #14(90) or
ones the same as for home-use sewing machine.