Preparation for sewing, 1. connecting power cord, 2. setting telescopic thread stand – SINGER WSL7234 User Manual
Page 7: 13 a
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
2. PREPARATION FOR SEWING
V_
V.
/
OFF
ON
13 a
V
J
J
J
2-1. Connecting Power Cord
Connect foot controller and power cord ® ®.
Before plugging in your machine, be sure that
voltage is same as that of your machine.
(written on a plate at back of machine).
* Specifications vary from country to country.
Put power switch on machine and turn on sewing
light.
Always switch off or unplug machine when not in
use.
The more you press foot controller, the faster the
machine runs.
When the power switch is turned off, the machine
will not operate even by pressure on the foot
controller.
2-2. Setting Telescopic Thread Stand
Extend the telescopic thread stand to its full
height, then turn it until the shaft clicks into its
locked position.