SINGER W1499 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
FITTING SHANK
AND
QUILTING SEAM GUIDE
Raise the presser bar and fit shank as
shown. (
1) Insert quilting/seam guide
carefully so as not to damage the holding
spring. (
2)
FITTING OF PRESSER FEET
Raise
the presser foot. Pull the one-touch
lever towards you and the foot will be
released. Centre new foot under shank.
Lower shank until p'oove is directly
above and touching the pin. Pull one-
touch lever towards you and the foot will
become engaged. (
3, 4)
Prewar bar
Shank tat tcraw
Loosen
Shank
"Presser bar
.Groove
holding spring
Shank
J
V
- 5 -
Advertising