Removing extension table – SINGER W1499 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
REMOVING EXTENSION TABLE
To convert the machine from flatHaed
to free-arm use simply remove the
tension table as shown.
THIS IS ONLY APPLICABLE TO MACHINES MANUFACTURED FOR THE UNIT€D KINGDOM
IMPORTANT
The wires in this mains lead are coloured in accordance with the following code:
BLUE - NEUTRAL
BROWN - LIVE
NOTE. As the colours of the mains lead of this appliance may not correspond with the coloured
markings identifying the terminals in your plug, proceed as follows:
Connect BROWN wire to terminal marked L or coloured RED.
Connect BLUE wire to terminal marked N or coloured BLACK.
FIT CORRECT PLUG TO POWER CORD
WHEN USING A B.S. 1363 FUSED PLUG, A 3 AMP. FUSE MUST BE FITTED.
If the terminals of the plug are unmarked consult a qualified electrician before use.
\Mien leaving the sewing machine unattended, the plug must be removed from the socket outlet
VWien servicing the sewing machine, or when removing covers or changing lamps, the machine or
the electrical set must be disconnected from the supply by removing the plug from the socket
outlet
THE MAXIMUM INPUT OF LAMP: 240 V 15 W.
THIS APPLIANCE CONFORMS TO THE STATUTORY RADIO INTERFERENCE
SUPPRESSION REGULATIONS.