Cleaning änd oiling the shuttle, Cleaning and oiling shuttle – SINGER W1268 User Manual
Page 25
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
23
CLEANING ÄND OILING THE SHUTTLE
(See Figs. 36 and 37)
The stitch forming mechanism occasionally becomes clogged with loose threads and lint. This
will interfere with the efficient operation of the machine. Cleaning and removal of the lint will
safeguard the performance. To remove the shuttle assembly, proceed as follows.
1. Turn the balance wheel until the needle reaches its highest position. Tilt head back on its
hinges.
2. Remove bobbin case (A), Fig. 36 and 37.
3
. Turn the two shuttle race cover clamps (B) outward and remove the shuttle race cover ( )
and shuttle body (D).
Fig. 37
Fig. 36
Advertising