Esc "¤" n "data" cr or lf, Esc "dc3" n – Citizen Systems iDP-3423 User Manual
Page 101
iDP-3420/3421/3423 User’s Manual
101
CITIZEN
ESC "¤" n "data" CR or LF
[Function]
Defining the message
[Code]
<1B>H <2F>H n "data" CR or LF
[Range]
1 £ n £ 10
[Outline]
This command can define up to a 50-byte message in one line. If the value of n
is specified beyond the range, the data following n will be treated as the print
data.
Once the message is defined, it remains valid until it is redefined. The data
should end with CR (0DH) or LF (0AH). If the data exceeds 50 bytes, the
subsequent data will be treated as the print data.
Once the message is defined, it remains valid until it is redefined or the download
deletion command (ESC DC2 n1 n2) is executed.
ESC "DC3" n
[Function]
Printing the message
[Code]
<1B>H <13>H n
[Range]
1 £ n £ 10
[Function]
This command prints a message. If the value of n is specified beyond the range,
the message will not be printed.