Esc "c" "4" n, Esc "c" "5" n – Citizen Systems iDP-3423 User Manual
Page 116
iDP-3420/3421/3423 User’s Manual
116
CITIZEN
ESC "c" "4" n
[Function]
Selecting the paper near end sensor valid for print stop
[Code]
<1B>H<63>H<34>H n
[Range]
0 £ n £ 255
[Outline]
This command selects the no-paper detector state in which printing should be
stopped.
Value
Bit
Function
0
1
0
Paper near end
Disabled
Enabled
1
Undefined
-
-
2
Undefined
-
-
3
Undefined
-
-
4
Undefined
-
-
5
Undefined
-
-
6
Undefined
-
-
7
Undefined
-
-
[Default]
n = 0
ESC "c" "5" n
[Function]
Selecting the panel switch enable/disable
[Code]
<1B>H <63>H <35>H n
[Range]
0 £ n £ 255
[Outline]
This command enables/disables the panel switches. n is valid only for the least
significant bit.
Setting n = 1 disables the panel switches.
Setting n = 0 enables the panel switches.
[Caution]
If the panel switches are disabled with this command, the LF switch will be
disabled. Therefore, the paper cannot be fed by the LF switch.
[Default]
n = 0