Citizen Systems iDP-3423 - Manual (Page 57)

iDP-3420/3421/3423 User’s Manual
57 CITIZEN
D D D Deeeettttaaaaililililssss
FF n
[Function] n-line paper feed
[Code] <0C>H n
[Range] 1 £ n £ 127
[Outline] This command feeds the paper by n-lines. You can set n = 1 to 127 lines. If the
print buffer contains the data, use of this command feeds the paper by n-lines
after printing the data. Setting n = 0 does not feed the paper.
SO
[Function] Specifying the double width character
[Code] <0E>H
[Outline] The data following this command is printed doubled in the horizontal direction.
Double width characters remain valid until the double width character cancel
command is entered, but they are also cancelled after they are printed one line.
Note that the double width characters take up two ordinary characters worth of
width.