Citizen Systems iDP-3423 - Manual (Page 102)

iDP-3420/3421/3423 User’s Manual
102 CITIZEN
ESC "y" n
[Function] Setting the print lines after paper near end detection
[Code] <1B>H<79>H n
[Range] 0 £ n1 £ 255
[Outline] This command sets the number of print lines after paper near end detection. It
stops printing after printing n ´ 2 lines since detection of the paper near end,
resulting in the paper near end state (See 4.12 Operation Panel and Error
Indications). The PE signal (Parallel interface only) changes when the paper
near end is detected.
[Default] n = 0
ESC DC2 n1 n2
[Function] Deleting the download character, message, bit image
[Code] <1B>H <12>H n1 n2
[Range] 0 £ n1£ 3
0 £ n2
(Specify 0 at n1 = 0)
(1 £ n2 £ 10 at n1 = 1)
(32 £ n2 £ 224 at n1 = 2)
(Specify 0 at n1 = 3)
[Outline] This command deletes the downloaded characters, message, and bit image.
n 1 Object Deleted
0 All(Message, characters, bit image)
1 Download message
2 Download characters
3 Download bit image
With n2, specify which data of the function specified with n1 should be deleted.
n2 = 0
Deletes all the download function specified with n1.
n2¹0 Deletes the data downloaded at the value specified with n2 (Value
specified when saving with each download command), of the
download function specified with n1.
Note) No meaning when n1 = 0 is set.