Citizen Systems iDP-3423 - Manual (Page 110)

iDP-3420/3421/3423 User’s Manual
110 CITIZEN
ESC "&" s n m [a[p] s ´ a]m - n + 1
[Function] Defining the download character set
[Code] <1B>H <26>H s n m [a[p] ... <ps ´ a>] m - n + 1
[Range] s = 2
32 £ n £ m £ 255
0 £ a £ 9
0 £ p1 ... ps ´ a £ 255
[Outline] This command defines the download alphenumerals or Katakana. s denotes the
number of bytes in the vertical direction, n the start character code, and m the
end character code, respectively. When defining only one character, set n = m.
The 224 ASCII code characters, 32 to 255, are definable. a specifies the number
of dots in the horizontal direction to be defined. p is the data you want to define
and shows the a-dots worth of pattern in the horizontal direction from the left
edge. The remaining pattern on the right side will be a space. Once the
download characters are defined, they remain valid until they are redefined or
the download deletion command (ESC DC2 n1 n2) is executed.
[Default] Same as the internal character set.
[Caution] The horizontally adjacent dots cannot be printed. The 2nd-byte data in the
vertical direction is valid only for the most significant bit.