Generac Power Systems MC - Manual (Page 61)

3.2,1,7~St:raighCpn brush holdei'
locking tangs on bearing carrier,
Kemove brush holder from carrier.
Remove brush leads from brushes
and remove brush holder and brus­
hes .
3,2,1»d-Remove al temator support
to vibration dampener bolts.
3,2.1,9-Remove two bottom stator 3,2.1,10-Remove 6 screws that ret-
bolts and stator bolt bar. aln bearing carrier to stator can,
Remove bearing carrier, using a
puller.
3,2,1.11-Ramove 2 upper stator
bolts and stator holt bar.
3,2.1.12-RGmove panel divider. The
stator can may now be removed as
well.
3.2-2