Cisco 2900 SERIES XL - Manual (Page 62)

Chapter 2 Installation
Installing the Switch in a Rack
2-20
Catalyst 2900 Series XL Hardware Installation Guide
78-6461-03
Figure 2-11 Mounting the Switch in a Rack
After the switch is mounted in the rack, power the switch as described in
“Powering On the Switch and Running POST” section on page 2-25 .
Attaching the Optional Cable Guide
We recommend attaching the cable guide to prevent the cables from obscuring the
front panel of the switch and the other devices installed in the rack. If the switch
is in a 19-, 23-, or 24-inch rack, use the supplied black screw as shown in
Figure 2-12 to attach the cable guide to the left or right bracket. The cable guide
for the modular switches requires two screws.
47301
1X 2X 3X 4X 5X 6X 7X 8X 9X 10X 11X 12X 13X 14X 15X 16X 17X 18X 19X 20X
22X 21X
1X 2X 3X 4X 5X 6X 7X 8X 9X 10X 11X 12X 13X 14X 15X 16X 17X 18X 19X 20X
22X 21X
23X 24X
100BaseFX
1 2
SERIES
Catalyst 2900
XL
MODE
100BaseFX
1X 2X 3X 4X 5X 6X 7X 8X 9X 10X 11X 12X 13X 14X
16X 17X 18X 19X 20X
22X 21X
10BaseT/100B aseTX
23X 24X
10BaseT/100B aseTX
SERIES
Catalyst 2900
XL
MODE
Phillips machine
screws
Phillips machine
screws