Section vi, Warranty information, A. returntng warranty card(s) – American Dryer Corp. AD-400 User Manual
Page 26: B. warranty, C. returntng warranty parts, Returning warranty card(s), Warranty, Returning warranty parts
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

SECTION VI
WARRANTY INFORMATION
A. RETURNTNG WARRANTY CARD(S)
1. Before any dryer leaves the ADC factory test area, a warranty card (P/N112250) is attached to the
dryer. These warranty cards are intended- to serve the customer in two ways. First, when ADC
receives the warranty card(s) back from a customer, we mail the appropriate parts manual to the
address indicated on the returned card. Second, we record the individual installation date and
warranty information to better serve you should you file a warranty claim.
If a warranty card (P/N 112250) did not come with your dryer, contact the ADC warranty or service
department at (508) 678-9000.
B. WARRANTY
For a copy of ADC's commercial warranty covering your particular dryer(s), contact the ADC distributor
from whom you purchased the equipment and request Commercial Dryer Warranty form P/N 450199. If
the distributor cannot be contacted or is unknown, warranty information can be obtained from the
factory by contacting the ADC warranty department at (508) 678-9000.
NOTE: Whenever contacting the ADC factory for warranty information, be sure to have the
model number and serial number available so that your inquiry can be handled in an
expeditious manner.
C. RETURNTNG WARRANTY PARTS
All dryer or parts warranty claims or inquiries should be addressed to the ADC warranty parts
department. To expedite processing, the following procedures must be followed:
1. No parts are to be returned to ADC without prior written authorization (Return Material
Authorization) from the factory.
j
NOTE: R.M.A.'s are valid for only sixty (60) days from date of issue.
a. The R.M.A. issued by the factory, as well as any other correspondence pertaining to the
returned part(s), must be included inside the package with the defective merchandise.
24