American Dryer Corp. AD-400 - Manual (Page 27)

2. Each part must be tagged with the following information:
a. Model and serial number of the dryer from which part was removed.
b. Nature of defect (be specific).
c. Date of dryer installation.
d. Date of part failure.
e. Specify whether the part(s) being, returned is for a replacement, a credit, or a refund.
I
NOTE: If a part is marked for a credit or a refund, the invoice number covering the purchase of
the replacement part must be provided.
I NOTE: Warranty tags (P/N 450064) are available at "no charge" from ADC upjon request.
3. The company returning the part(s) must clearly note the complete company name and address on the
outside of the package.
4. All retuims must be properly packaged to insure that they are not damaged in transit. No
replacements, credits, or re^nds will be issued for merchandise damaged in transit. Damage claims
are the responsibility of the shipper.
5. All returns should be shipped to the ADC factory in such a manner that they are insured and a proof
of delivery can be obtained by the sender.
6. Shipping charges are not the responsibility of ADC. All returns should be "prepaid" to the factory.
Any "COD" or "collect" returns will not be accepted.
IMPORTANT: No replacements, credits, or refunds will be issued if the claim cannot be
processed due to insufficient information. The party filing the claim will be notified in writing
either by "fax" or "certified mail - return receipt requested," as to the information necessary to
process the claim. If a reply is not received by the ADC warranty department within thirty (30)
days from fax/letter date, then no replacement, credit, or refund will be issued, and the
merchandise will be discarded.
25