Aiphone AN-8000EX User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Mini-clamp connectors for line terminals and detachable terminal plugs for paging output terminal are supplied
with the AN-8000EX Exchange.
Perform each connector connection as follows.
8.4. Connector Connection
8.4.1. Mini-clamp connector connection
Connect the mini-clamp connector supplied with the AN-8000EX to a cable using a commercially available
tool (pliers).
securely to a cover section (transparent side) of the
mini-clamp connector.
Note
insert the cable without stripping the cable jacket.
For cables, refer to p. 12, Type of Cable.
Step 2. With a pair of pliers, lightly pinch the mini-clamp cover
and, after ensuring that the cable is securely inserted,
firmly squeeze on the cover.
Note
Squeeze on the mini-clamp cover until it is correctly
locked.
Step 3. insert the wired connector (plug) into the exchange's connector (socket) until it locks into place.
IQ