Aiphone AN-8000EX User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
For cable connection to the E-7000TB Terminal Board use the optional YC-105, clipping tool.
Hook the end of the cable onto the terminal and, with the cable end in hand, press the YC-105 Dedicated Tool
down onto the terminal from above. Pressing down the YC-105 tool cuts off the excess cable end, securing
the connection.
For cables, refer to p. 12, Type of Cable.
8.5. E-7000TB Terminal Board Wiring
Bind the cables using cable
clips supplied with the E7000TB.
1
^
Advertising