Recording from the radio, 1 insert a cassette, 2 set the function switch to radio – Aiwa CSD-ES370 User Manual
Page 24: 3 set the band switch to select a band, 4 turn the tuning control to tune in to a station, 5 press the # rec button to start recording, Basic operation, After recording
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
FM MODE/OSC
OPE/BATT/DIR
1
CSD-ES770
II
PAUSE DIR
1
CSD-ES570/ES370
»PAUSE 1
5
RECORDING FROM THE RADIO
Recording is done on the side facing the cassette holder.
Use type I (normal) tapes.
1 Insert a cassette.
(a) The side to be recorded on
2 Set the FUNCTION switch to RADIO.
For CSD-ES770, make sure that the < light of the OPE/BATT/DIR
Indicator is on. if it is not on, press the DIR button to turn it on.
3 Set the BAND switch to select a band.
4 Turn the TUNING control to tune in to a station.
5 Press the # REC button to start recording.
The PLAY button is depressed automatically.
The REVERSE MODE button is also depressed (CSD-ES770
only).
Basic operation
Press the following buttons.
To stop
M± STOP/EJECT
To pause
II
PAUSE button
Press again to resume recording.
After recording
Set the FUNCTION switch to POWER (!) STANDBY/TAPE.
If a high-pitched sound is heard during recording from AM
Press the FM MODE/OSC button to select the position that gives the
less noise.
Each time you press the button, the display changes as illustrated.
To erase the recording
1 Set the FUNCTION switch to POWER d) STANDBY/TAPE.
2 Insert a cassette with the side to be erased facing the cassette
holder.
3 Press the • REC button to start erasing.
CSD-ES770
CSD-ES570/ES370
J.CD
PLAY REC
REVERSE
MODE
PLAY REC
24