Datalogic Scanning F734-E - Manual (Page 37)

USE AND OPERATION
3
3.2 BARCODE SCANNING
When reading a barcode point the terminal laser beam at the code
from an appropriate distance and simultaneously press the
<SCAN> key. The beam emitted by the laser must completely cover
the barcode; the LED (and the acoustic signal, if activated) will
indicate if the scan was carried out correctly.
NO
OK OK
NO
Figure 16 - F734-E Series Terminal Scanning a Barcode
NOTE
Throughout the operation of the application, the
battery icon
, and the time icon will always be
activated, the latter in accordance with the setting
of the terminal internal clock.
In addition, when an acoustic signal is emitted,
the loudspeaker icon will appear.
19