Initializing the bal – A&D GR Series GR-300 User Manual
Page 30
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Initializing the Bal
in p |.y^i
"
■№ Nl*>
This function returns the following parameters to factory settings.
□ Calibration data.
□ Function table.
□
The 100% weight
□
The data that is stored in the balance using data memory function.
□
External calibration weight and target weight.
□
Switch settings for "Permission or prohibition".
Operation
Step 1 Turn off the display.
Step 2 Press the [
q
]^FF I key while the [
range
¡key
While press
and PRINT I key are pressed and held. Then
the balance displays
\ P S
hold these keyd^
Press the key(
Step 3 Press the [RANGE key to display f /. r
Step 4 Press the PRINT key. (If you want to cancel this
operation, press the CAi^ key)
Step 5 Press the , RE-ZERO | key
Step 6 Press the PRINT key to initialize the balance.
The balance will automatically return to weighing
mode.
o
I L
r no
r t . r ^
LL I UQ
r I
UlO
o nnnnri
LtULIUU
Adapting to environment
page 29
8. Function Switch and Initialization