A&D GR Series GR-300 - Manual (Page 35)

Explanation of Item "Environment, DispI
“ - ^ J I I
L U I I U U
Condition { L o n d )
This parameter is for sensitive response to the fluctuation of
a weight value. Use for target weighing of powder, weighing
of a very light sample or weighing requiring quick response.
L U ‘ I LI L
This parameter is for stable weighing with slow response. Use
to prevent a weight value from drifting depended on the
balance location.
Stability band width ( S t - b )
This item controls the width to regard a weight value as a stable value.
When the fluctuation per second is less than this parameter, the balance
displays the stability indicator and outputs or stores the data. This param­
eter influences the "Auto-print mode"
This parameter is for sensitive response of the stability
indicator. Use for exact weighing.
p This parameter ignores slight fluctuation of a weight value.
Use to prevent the weight value from drifting.
n
LI
Zero tracking ( t <- c )
This function traces zero point drift and keeps a zero display automatically,
when the weighing value drifts due to changes in the environment.
t r r 0 The tracking function is not being used. Use for weighing of
J a very light sample.
h r r I The tracking function is used.
Display update rate ( SPo' )
The display update rate influences "Baud rate", "Data pause" and "Stream
mode".
Decimal point ( t ' t )
The decimal point form can be selected.
Automatic start ( p o n )
When the AC adapter is connected, weighing is automatically started
without key operation. Use for a built-in balance in a system. Warm-up for
at least one hour is necessary for accurate weighing.
9. Function Table Page 34 Functions