Compliance with fcc rules, Compliance with emc directives – A&D GR Series GR-300 User Manual

Page 5

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Compliance with FCC Rules

Please note that this equipment generates, uses and can radiate radio

frequency energy. This equipment has been tested and has been found
to comply with the limits of a Class A computing device pursuant to Subpart

J of Part 15 of FCC rules. These rules are designed to provide reasonable

protection against interference when equipment is operated in a commer­
cial environment. If this unit is operated in a residential area it might cause
some interference and under these circumstances the user would be

required to take, at his own expense, whatever measures are necessary

to eliminate the interference.

(FCC = Federal Communications Commission in the U.S.A.)

Compliance with EMC Directives

C€

Note 1

This device features radio interference suppression in compli­

ance with valid EC Regulation 89/366/EEC.

The displayed value may be adversely affected under extreme
electromagnetic influences.

2

Protect the RS-232C connector from extreme electrostatic dis­
charge when peripheral equipment is not connected.

Protect the AC adapter jack from extreme electrostatic discharge

when the AC adapter is not connected.

1. Introduction

Page 4

Basic operation

Advertising
This manual is related to the following products: