Akai Multi Video Processor RMD-V3104U - Manual (Page 2)

INTRODUCTION
Thank you for buying this Pioneer product.
Please read through these operating instructions so you
will know howto operate your model properly. After you
have finished reading the instructions, put them away in
a safe piace for future reference, in some countries or
regions, the shape of the power plug and power outiet
may sometimes differ from that shown in the explana­
tory drawings. However, the method of connecting and
operating the unit is the same.
The following symbols are found on labels attached
to the product. They alert the operators and ser­
vice personnel of this equipment to any potentially
dangerous conditions.
AWARNING
This symbol refers to a hazard or unsafe practice
which can result in severe personal injury or death.
ACAUTION
This symbol refers to a hazard or unsafe practice
which can result in personal injury or property
damage.
CONTENTS
INTRODUCTION....................................... 2
PRECAUTIONS UPON USE........................3
INSTALLATION PRECAUTIONS................. 4
FEATURES.................................................5
TYPICAL SETUP.........................................6
CONTROLS AND CONNECTORS...............7
OPTION BOARD....................................... 11
TROUBLESHOOTING.............................. 12
SPECIFICATIONS.................................... 13
Note to CATV system installer
This reminderis provided tocalltheCATVsystem installer's
attention to Article 820-40 of the NEC that provides
guidelinesforpropergrounding and, in particular, specifies
that the cable ground shall be connected to the grounding
system of the building, as close to the point of cable entry
as practical.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC
Rules. These limitsaredisignedto provide reasonable protection against harmfuMnterference when the equipment isoperated
in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of
this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.
CAUTION: This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other
equipment. To prevent electromagnetic interference with electric appliances such as radios and televisions, use shielded cables
and connectors for connections.
[For Canadian model]
This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
2
<ARE1336>
En