18) to select preset model [m command – Akai Multi Video Processor RMD-V3104U User Manual
Page 42
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
MVP MANUAL
(18) To select preset model [M command]
Input :
Explanation : •
Mhih2
Refer to "VS Board Model Selection” described later for the VS board model selection.
Forcible locks the model data preset.
Model data No.
Discriminates the model.
VGA (640 x 480)
IBM-PC (EGA emulation)
Macintosh 13-inch monitor mode (Standard)
Macintosh 13-inch monitor mode (RasterOps type)
Macintosh 13-inch monitor mode (Power Mac)
FM-R50
IBM Think Pad 230C
X68000
NEC PC9801 (640 x 400 mode)
hi
h2
0
0
0
1
0
2
0
3
0
4
0
5
0
6
0
7
0
8
0
9
1
0
2
7/
2
8^
5
8
9
9
Unused area (Do not specify using the M command.)
User preset area (Use only with the M command.)
Models other than above.
This model data can be locked only using the M command.
The data range which can be preset by the user is 28 to 58. 28 to 58 contains the VGA data (same
as 01) at shipment.
Refer to Mode 99 mentioned later for details of model No. 99.
168