Configuring the video di play, U ing the wildcat configuration tab, Configuring the video display – 3DLABS Wildcat III 6110 User Manual

Page 24: Using the wildcat configuration tab

Advertising
background image

Software Configuration

3Dlabs Graphics Accelerator Card User's Guide

The 3Dlabs Wildcat III 6210 or Wildcat III 6110 Driver

The 3Dlabs Wildcat III 6210 or Wildcat III 6110 driver software allows you to optimize the working
relationship between your card, your system, and your applications.

This chapter contains instructions for configuring the video display, stereo display, and dual monitors.

Configuring the Video Display

Once the Wildcat driver is installed properly, the Display Properties dialog box will have two additional
tabs: Wildcat Configuration and Wildcat Monitor.

Using the Wildcat Configuration tab

1. Make sure you are logged into the non-VGA version of Windows. Refer to Windows

documentation or online Help for instructions, if necessary.

2. Close any open applications.
3. Right click on the Windows desktop (or left click if you’ve altered the default mouse

setup) and choose Properties from the menu. Click the Settings tab, then click Advanced.

4. Click the Wildcat Configuration tab if it is not already displayed. On the Wildcat

Configuration tab:

· Click Hardware Info to view the current hardware settings.

· Click View Config to view your current display configuration.

·

Click Config Wizard to activate a step-by-step interface that will help you modify your
current display configuration or create a new one. On the Wildcat Configuration Wizard,
click Next and follow the prompts to create a new configuration, or modify or delete an
existing one. See “Enabling application-specific optimizations” and “Creating a custom
configuration” later in this chapter for more information.

Advertising
This manual is related to the following products: