3DLABS Wildcat III 6110 - Manual (Page 48)

3Dlabs Graphics Accelerator Card User's Guide
DECLARATION OF CONFORMITY
Manufacturer’s Name: 3Dlabs Ltd – Wildcat Division
Manufacturer’s Address: Huntsville, Alabama, USA. 35824
declares that the product
Product Name: Wildcat III 6110/6210 Graphics Accelerator Card
conforms to the following product specifications:
EMC
Following provisions of the 89/336/EEC Directive
Specification Class / Level
EN 55022:1994 (CISPR 22 limits)
Class B
Radiated Electric Field Emissions
EN 55022:1994 (CISPR 22 limits)
Class B
Power Line Conducted Emissions
47 CFR Part 15,Subpart B (ANSI C63.4:1992)
Class B
Radiated Electric Field Emissions
EN 55024:1998
(IEC 61000-4-3)
Radiated Disturbance Immunity
EN 55024:1998
(EN 61000-4-2:1995)
Electrostatic Discharge Immunity
EN 55024:1998
(EN 61000-4-4:1995)
Electrical Fast Transient/Burst Immunity
EN 55024:1998
(EN 61000-4-6:1996)
Conducted Disturbance Immunity
EN 55024:1998
(EN 61000-4-11:1994)
Voltage Dips and Sags Immunity
EN 55024:1998
(EN 61000-4-5:1995)
Surge Immunity
Date of Declaration: ………………
Issued by: …………………………
Principal Production Engineer, 3Dlabs Ltd. +44 (0) 1784 476646
This product complies with Part 15 of FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interferences that may cause undesired operation.
This Class B digital apparatus complies with Canadian ICES-003.
UL 1950 PAG 1.7-003: This graphics card is for use with UL Listed personal computers that have
installation instructions detailing user installation of card cage accessories.
11-12-01