3DLABS Wildcat 4110 - Manual (Page 13)

7
Collect Materials and Tools
Make sure you have the following items:
♦ 3Dlabs Wildcat 4110 PRO video card
♦ Delivery media with the 3Dlabs Wildcat 4110 PRO video display driver
♦ Flat-head or Phillips screwdriver
♦ Monitor cable supplied with your computer or with the monitor
♦ Your computer’s documentation
♦ Grounding wrist strap
Take Anti-static Precautions
Static electricity can damage the components inside a computer or on a printed circuit card. To reduce the
possibility of electrostatic discharge:
♦ Turn off power to the computer.
CAUTION: Physically remove the power cord from the system and wait 15 to 30 seconds for
standby power to dissipate. Damage can occur to add-in components if power is not
physically removed from the system during installation procedures.
♦ Touch the metal chassis of the computer to drain off any static electricity before touching
the card.
♦ Wear a properly connected grounding wrist strap when handling the card or working in
the computer.
♦ Do not wear wool or polyester clothing.
♦ Work in an area with a relative humidity of at least 50 percent.
♦ Keep the card in the anti-static bag until you are ready to install it.
♦ Handle the card as little as possible and only by the edges.