3xLOGIC 3xCLOUD Web Client - Manual (Page 13)

5.1.2 Editing a Server
To Edit a VIGIL Server's details, click the button located next to your desired Server.
This will open the Edit Server Form (pictured below.)
Figure 5.1.2 A
Figure 5.1.2 B
Servers Configured Using Serial No./ Alias (Figure 5.1.2 A)
If the VIGIL Server you are editing was configured using a VIGIL Connect alias or serial number, the Edit Server Form will appear as is
pictured in Figure 5.1.2 A, above.
Server Configured using IP Address and Port (Figure 5.1.2 B)
If the VIGIL Server you are editing was configured using an IP Address and standard VIGIL port ranges, the Edit Server Form will
appear as is pictured in Figure 5.1.2 B, above.
©2014 3xLOGIC Inc. | 3xCLOUD Web Client - User Guide - 9 -