ADLINK DAQe-2006 - Manual (Page 33)

Signal Connections 21
3 Signal Connections
This chapter describes DAQ-/DAQe-/PXI-2016/2010/2006/2005
card connectors and the signal connection between the DAQ-/
DAQe-/PXI-2016/2010/2006/2005 card and external devices.
3.1 Connectors Pin Assignment
The DAQe-/PXI-2016/2010/2006/2005 card is equipped with one
68-pin VHDCI-type connector (AMP-787254-1). It is used for digi-
tal input/output, analog input/output, timer/counter signals, etc.
One 20-pin ribbon male connector is used for SSI (System Syn-
chronous Interface) in DAQ-2016/2010/2006/2005 card. The pin
assignments of the connectors are defined in Table 3-1 and
Table 3-2.