3 _7200_initial, Description, Syntax – ADLINK PCI-7200 User Manual
Page 56: Argument, Return code, 7200_initial, Description @ syntax @ argument @ return code
44
C/C++ Libraries
5.3 _7200_Initial
@ Description
A PCI-7200 card is initialized according to the card number.
Because the PCI-7200 is PCI bus architecture and meets the Plug
and Play design, the IRQ and base_address (pass-through
address) are assigned by system BIOS directly. Every PCI-7200
card has to be initialized by this function before calling other func-
tions.
Note:
Because the configuration of PCI-7200 is handled by the
system, there are no jumpers or DMA selection on the PCI
boards that need to be set up by the users.
@ Syntax
Visual C++ (Windows 95)
int W_7200_Initial (U8 card_number, U16
*base_addresss, U8 *irq_no)
Visual Basic (Windows 95)
W_7200_Initial (ByVal card_number As Byte,
base_addresss As Integer, irq_no As Byte) As
Long
C/C++ (DOS)
int _7200_Initial (U8 card_number, U16
*base_addresss, U8 *irq_no)
@ Argument
card_number: the card number to be initialized, only four cards
can be initialized, the card number must be CARD_1, CARD_2,
CARD_3 or CARD_4.
base_address: the I/O port base address of the card, it is
assigned by the system BIOS.
irq_no: the system will give an available interrupt number to this
card automatically.
@ Return Code
ERR_NoError
ERR_InvalidBoardNumber