ADLINK PXIS-2670 - Manual (Page 24)

16 Troubleshooting and Preventative Maintenance
4.2 Cleaning
Cleaning procedures consist of two parts: interior and exterior
cleaning of the chassis. Refer to your module user documentation
for information about cleaning the individual CompactPCI or PXI
modules.
Note: Always power-off the chassis and disconnect the power cord
before cleaning of servicing the chassis.
Interior Cleaning
Use a dry, low-velocity stream of air for cleaning the interior of the
chassis. Clean around components with a soft-bristle brush. If you
must use a liquid for minor interior cleaning, use a 75% isopropyl
alcohol solution and rinse with deionized water.
Exterior Cleaning
Use a dry lint-free cloth or a soft-bristle brush to clean the exterior
surfaces of the chassis. If any dirt remains, moisten a cloth to wipe
the exterior surfaces of the chassis in a mild soap solution. Wiping
with a cloth moistened with clear water to remove any soap resi-
due. Do not use abrasive compounds on any part of the chassis.