ADLINK PXIS-2670 - Manual (Page 25)

Troubleshooting and Preventative Maintenance 17
4.3 Temperature Detect
If the system overheats, an Amber Temp LED flashes and a
buzzer beeps continuously. There are three values of temperature
setting, 50
°
C, 60
°
C, and 70
°
C. The default is 50
°
C. Contact
ADLINK if you need to change setting.
4.4 Fan Hot-Swap Replacement
There is a LED for each fan for system monitoring. When any one
of the fans is defective, the corresponding LED flashes and the
alarm buzzer keep beeping. Please refer to the following for the
fan hot-swap replacement.
Fan Hot-Swap Replacement Procedure
1. Press the Alarm RST button on the front panel to stop
the beeping.
2. Remove the front panel cover of fans.
3. Pull out the defective fan.
4. Replace with a new fan.
5. Cover back the fans panel cover.