ADLINK HSL-DO32-M-N/HSL-DO32-M-P - Manual (Page 10)

vi How to Use This Manual
How to Use This Manual
This manual helps you in configuring, installing, and using the HSL
series products, and describes the functions and the operational
theorem of the high-speed link technology. This manual is divided
into the following chapters:
Chapter 1 - HSL Introduction: Provides an overview of the HSL
system, including the system features, specifications, and commu-
nication technology.
Chapter 2 - HSL Master Controller: Presents detailed informa-
tion on the HSL master.
Chapter 3 - HSL Slave Module: Presents detailed information on
the HSL slave modules.
Chapter 4 - HSL LinkMaster Utility: Provides instructions on how
to install and use the ADLINK LinkMaster utility for testing and
debugging the slave modules.
Chapter 5 - HSL Function Library: Presents the function library
usage and syntax.
Chapter 6 - Programming with HSL Function Library: Provides
a broad concept and knowledge of how to implement the applica-
tion with the HSL library.
Appendix A - Scan Time Table: Presents the HSL cycle time
based on different transmission speeds and modes.
Appendix B - Mapping Table: Provides a comparison table
between old and new functions.
Appendix C - HSL-AI16AO2 Calibration: Outlines the calibration
procedures for HSL-AI16AO2-M-VV and HSL-AI16AO2-M-AV.
Appendix D - HSL-HUB/Repeater information: Presents the
adding time information and extension limitations.