9 hsl-4xmo utility, Hsl-4xmo utility – ADLINK HSL-DO32-M-N/HSL-DO32-M-P User Manual
Page 89
Advertising
76
HSL LinkMaster Utility
9. Calibration. Calibrates the module. The modules are
shipped with correct calibration. Refer to Appendix C if
you want to recalibrate the module.
10.Exit. Closes the utility.
11.Slave Status: Shows the communication status between
the slave module and the master card. The functions
definition are enumerated below.
Z
Bit 0 is Data_Req bit.
Z
Bit 2 is for CHK1. When Bit2 is equal to 1, a communica-
tion error occurred once).
Z
Bit 3 is for CHK3. When Bit3 is equal to 1, a communica-
tion error occurred three times.
Z
Bit 4, Bit 5 and Bit 6 bits are for CHK7. WhenBit4, Bit5,
and Bit6 are all equal to 1, a communication error
occurred seven times.
4.2.9 HSL-4XMO Utility
Refer to the HSL-4XMO user’s manual.
Advertising