ADLINK HSL-DO32-M-N/HSL-DO32-M-P - Manual (Page 82)

HSL LinkMaster Utility 69
X J. Test slave module
X
K. Exit motion creator
X
L. Version information
Below are descriptions of the main interface buttons.
1. Current Select Card ID. When LinkMaster is activated,
it searches all HSL master control cards installed in the
system, such as PCI-7853, PCI-7854 and PMC-7852/G.
Every card shows its index (ID) ranging from 0 to?. You
can use this function to specify which card you want to
operate.
2. Current Select Connect Index. For cards with two mas-
ter controllers such as PCI-7854 and PMC-7852/G, the
connect index ranges from 0 to 1. For single master con-
troller such as PCI-7853, the connect index is 0. Refer to
the diagram below.
3. ALL Slave ID Connection Test. The screen capture
below shows a live scan of all I/O modules for network
quality test. The LinkMaster lets you check the network
environment.
Start the test by clicking on the Test button. Press Stop to stop
scanning. When you start the test, the utility continuously tests
each ID and shows the module type to left-column labels. Right-
column labels show the counter for communication error.